SurgeX Empower Power Conditioner/ Surge Protector

The Empower 8 Outlet Surge Suppression Modular will enhance your audio/video experience to its maximum level. This surge suppression unit offers four switched digital outlets, two switched analog outlets, and two always-on outlets for a total of 8 AC outlets. Because its non-current-limiting, the 8 Outlet Surge Suppression Modular allows power amplifiers to replicate fast energy transients across the full dynamic range of your system.

The modulars shielded steel enclosure blocks magnetic field interference and has a diagnostic circuit with a visual indicator for easy maintenance. The systems advanced Impedance Tolerant® EMI/RFI filtering removes electro-magnetic and radio-frequency noise caused by the appliance motors, lighting, TVs, radios, computer monitors and other devices in your home.

Additional features include soft turn-on, recommended for multi-component systems with large amplifier power systems, and remote turn-on compatibility with optional third-party controllers.

Have a rack-mounted system? This 8 Outlet Surge Suppression Modular is also available with rack ears, and should your system be comprised of more than eight components, Empower offers a modular with 14 outlets to cover your every need.

Features:

8 AC outlets on rear panel

Front panel line voltage indicator

Advanced Impedance Tolerant® EMI/RFI filtering

Thermal dynamic overload protection

Dimensions: 1.75" H x 19" W x 8" D

AC Cord Length: 9 Feet

Load Rating: 15 amps @ 120 volts

UL 1449-2 Adjunct Classification Test Results: 1000 surges, 6000 volts, 3000 amps, C1 pulse, measured suppressed voltage 290 volts, no failures

Clamping Voltage Onset: 172 volts nominal (2 volts above peak line voltage, auto-tracking)

Filter (Bi-Directional, Wave Tracking, With 50 Ohm Load: 3dB @ 3kHz; 38dB @ 100kHz; 50dB @ 300kHz; 50dB @ 5MHz; 50dB @ 30MHz

Let-Through Slew Rate: 5000 volt/µs disturbance reduced to 28 volt/µs within power wave envelope; less than 10 volt/µs outside power wave envelope

Maximum Applied Transient Pulse Joule Rating: Unlimited, due to surge current limiting (8 x 20µs)

Maximum Applied Transient Pulse Voltage: 6000 volts (1.2 x 50µs pulse), industry standard rating

Maximum Applied Transient Pulse Current: 100,000 amperes (8 x 20µs)

Endurance, IEEE C62.41-1991 Category B3 (C1) Pulses: 1kv>500,000; 3 kv>10,000; 6 kv>1000

Warranty: 10 years