The C2N-SPWS300 is a 24 volt 300 watt Cresnet system power supply. This device has 8 outputs and can be monitored and controlled with a Cresnet port.
Power switch The supply can be operated in a stand-alone mode by turning on an A/C power switch or as a slave to another Cresnet system in the PWR OFF/SLAVE position. In slave mode, 24V from the Cresnet connector closes a relay that provides A/C for the supply.
Output Each of the 8 outputs has a 75W rating with a combined output rating of 300 watts. Each output has an electronic circuit breaker that disables a faulted output without affecting the others. The circuit breaker can be reset by either pressing a reset button or by Cresnet command. The total current in the supply is monitored and all breakers are tripped if the overall rating is exceeded. All faults can be reported to Cresnet. There are two 2-position large connectors for each output.
Cresnet 4-Pin screw terminal LEDs PWR Green - indicates 24V supply is on NET Yellow - indicates device is polled in Cresnet. SETUP Red - Used for future plug and play 8 PWR Green - Indicates that output has power 8 OVRLD RED - Indicates that electronic breaker has tripped. Pushbuttons 8 overload reset buttons; 1 Cresnet setup button Environmental Operating temperature 5 to 40 deg C Humidity 10% to 90% RH (non-condensing)
