Powerline Control Systems has designed a series of high-power lighting modules that controls up to four circuits and up to 2000W of lighting. The loads can be controlled remotely by powerline carrier signals or locally with inexpensive remote slave switches. When installed properly, the LM4/LM1 series can provide a very reliable and inexpensive alternative to any hard-wired lighting system.

The modules are all constructed of rugged black anodized aluminum. The LM4/LM1 series is provided with an internal fuse that protects the output circuits against overload or short circuits. The enclosure is designed with heavy duty heat sinking for reliable operation in the harshest environments.

To facilitate the use of LM4/LM1 units PCS has designed the LCP Nema 1 type electrical panels. These NEMA 1 type enclosures provide for a very clean professional installation of multiple LM4s. See the LCP data sheet.

The PCS SceneMaster lighting control system allows the designer/installer to implement up to sixteen pre-set scenes for each circuit. The scenes lighting levels can easily be changed using SceneMasters innovative programming system. When initial programming is complete, just one X-10 ON command (less than 0.6 seconds) is all you need to activate any group of lights simultaneously.

The SceneMaster lighting system allows "room" scenes (such as home theater, dining room), "pathway" scenes (such as lights from kitchen to pool house) and "whole-house" scenes or house-modes (such as "night", "away", "home", "alarm"). Every scene can have a different ramp rate and every light in a scene can have a different pre-set level.

All PCS products are completely Made in USA and carry a five-year limited warranty.

Product Features

• 2000 Watt Power Delivery
  Modules are designed to deliver the full 2000 watts of power allowed by UL.
  Four / One Circuit Versions
  The 4-channel version can output 2000 W total and 1000 W per channel.  The 1-channel version can output 2000 W.
• Mounts in Standard Four Gang Box
  Fits cleanly in a standard four gang box outlet box.
• Internal Fuse Protection
  Internal fuse included for overload protection.
• LED Power Indicators
  LED used for night light, programming, and powerline signal monitoring
• PCS Reliability
  Our commitment includes 100% full burn-in, and strict quality control.
• Multi-Way Control
  Each channel can be controlled individually by one or more Decora remote wall switches.

Ordering Information

• Part Number
• LM4L/S-2000 (Dimming, 4 Circuits)
• LM1L/S-2000 (Dimming, 1 Circuit)
• SSR-W, I (Remote Switch, White/Ivory/Almond/Gray/Black)
• SPM-2 Programming Manual

Installation

• Pre-wire
  Mount a standard four-gang box or RACO 953 box. Run two #12 wires for line-in and neutral, two #12 for each load and two #12 for each remote slave switch.
• Connection
  Terminal Block (#10-#14 wire)

Additional Information

• Load Types
• Dimming (Lamp) Outputs
• Incandescent or Magnetic Low Voltage.
• Halogen Lights
• Resistive loads to 15 amps maximum.
• Warranty
• Five-year limited warranty.
• UL Listing
• UL 1472

Specifications

• Model Number LM4L/S-2000 LM1L/S-2000 Circuits 4 Channels 1 Channel Operation Dimming (Triac) Dimming (Triac) Max Total Load 2000 W / 2000 VA 2000 W / 2000 VA Input Power 125 VAC, 16 A 125 VAC, 16 A Max Load per Output 1000 W 2000 W Min Load 60 W 60 W Min Receive Level 10 mV 10 mV Max Noise Rejection 350 mV 350 mV Connection Terminal Block Terminal Block Indicator / Output LED Yes / Yes Yes / Yes Dimensions 11.0 x 5.0 x 1.63 in 11.0 x 5.0 x 1.63 in Weight 1.25 lb. 1.25 lb. Mounting Standard 4 gang J box Standard 4 gang J box Operating Temperature -40 F to 104 F -40 F to 104 F