Item #RMB1077
 

Product info

Home-logo
Rotel RMB-1077 Class D seven channel amplifier
Rmb1077

Product overview

Class D amplifiers are not new. But, to date, many Classe D amplifiers have been relegated to low performance electronics, or limited bandwidth products such as subwoofers. Now, with ICEpower® technology, Rotel’s new RMB-1077, delivers full bandwidth, high performance sound with plenty of power output and very low heat and distortion.

The new technology is based on two principals named Controlled Oscillation Modulation (COM) and Multivariable Enhanced Cascade Control (MECC). Together, these two designs form the intelligent power processing (the brains) of the technology to ensure that the amplifier’s power supply and output is rock solid even under complex speaker loads or power supply variations.

The result is a high power, high performance, multichannel power amplifier that occupies only 60mm of height; a minimal amount of space compared to regular amplifiers for heat dissipation. That’s because the RMB-1077 Classe D amplifier is over 90% efficient and produces almost no heat.

The RMB-1077 offers up a lot of power in a small package. At 7 x 100 watts per channel into 8 ohms, it is a superb choice for
all but the very largest home theater systems.

S   P   E   C   I   F   I    C   A   T   I   O   N   S

Model RMB-1077
Power Configurations (FTC) 7 x 100 Watts
Watts/Channel 100 watts, all channels driven, with 20KHz filter, 8 ohm load, 20-20 kHz, 0.03% THD
Total Harmonic Distortion (20 Hz - 20 kHz, 8 ohms)
cont. rated power
one-half rated power
one watt per channel

<0.03%
<0.03%
<0.03%
<0.03%

Intermodulation Distortion
(60 Hz: 7 kHz, 4:1)
< 0.03%
Frequency Response 10 - 80 KHz (±3dB)
Damping Factor
(20 - 20,000 Hz, 8 ohms)
-
400
Speaker Impedance 4 ohms minimum
Signal to Noise Ratio (IHF A network) 105 dB
Input Sensitivity/Impedance
1.2 V / 8.3 k ohms
Power Requirements:

120 Volts, 60 Hz (U.S. version)
230 Volts, 50 Hz (European version)
Power Consumption:

400 Watts
70 Watts - Idling
3 Watts - Standby

Dimensions (W x H x D):

432 x 72 x 415 mm
17 1/8 x 2 7/8 x 16 3/8"
Panel Height 60 mm, 2 3/8"
Weight (net): 7.8 kg, 17.2 lb.