The RSX-1067 is the definitive Home Theater surround-sound receiver. It gets all the elements right with a high capacity power supply built around a massive toroidal transformer to deliver precise amounts of voltage and current to all active circuitry. The payoff is in real performance – in both brute power and in the sonic subtleties important to the most discerning audiophile. When driving a multi-channel speaker
array, for example, the RSX-1067 delivers 100 high-current watts from each of its seven amplifiers. Does 5.1 satisfy your surround needs? Then use the remaining two channels for audio in a second room!
The RSX-1067 has enough inputs and outputs to meet almost any system configuration. Custom ID capability lets you program the front panel display for instant source identification. Assignable digital inputs let you match the RSX-1067 to your chosen roster of sources. For the audio purist there’s even a mode that bypasses all digital processing. You’ll even find 30 AM/FM presets for instant access to your favorite broadcasts.
Advanced microprocessors from Crystal Semiconductor handle Dolby Digital (complete with dynamic range adjustments), Dolby EX, DTS and Dolby Pro Logic II decoding. The RSX-1067 automatically detects and decodes DTS ES, DTS ES Discrete, HDCD, and MP3 encoded audio and provides several music modes for optimum enjoyment of all sources. Jitter and ripple-free digital-to-analog conversion ensures the highest sound quality.
Multi-zone, multi-source audio and HDTV video capability? Of course. Thanks to high performance video switching (with bandwidth over 100MHz!), the RSX-1067 handles three component video sources and provides a component video output for high resolution monitoring. Furthermore, internal video transcoding capability means all video sources, even those with just composite and S-video outputs, will look their best.
The RSX-1067 boasts a full complement of convenience features, too. You can specify both turn-on and maximum volume settings, specify volume control tracking or “speed,” select group delay to accurately synch video and audio. You’ll benefit from an advanced, comprehensive, yet simple-to-use speaker set-up menu to tailor your system exactly to your specifications.
For custom installations, the RSX-1067 includes an RS-232 interface, three assignable 12-volt trigger outputs, discrete on/off remote control command codes, rear panel IR inputs, and a detachable AC power cord. The fully programmable RR-1050 remote control is standard.
S P E C I F I C A T I O N S
| Model |
RSX-1067
|
| Audio |
|
Continuous Amplifier Power
(Number of channels driven) |
100 watts/ch (20-20k Hz, <0.05% THD, 8 ohms)
(Seven Channel Driven) |
Continuous Amplifier Power
(two channels driven) |
120 watts/ch (1kHz, <1.0% THD, 8 ohms, DIN)
(Two Channel Driven) |
| Total Harmonic Distortion |
<0.05 % |
| Intermodulation Distortion (60 Hz:7 kHz) |
<0.05% |
Frequency Response
Analog Bypass
Digital Input |
-
10 Hz - 120 KHz, ± 3 dB
10 Hz - 95 KHz, ± 3 dB |
Signal to Noise Ratio (IHF A-weighted)
Analog Bypass
Digital Input 0 dBFs (Dolby Digital, dts) |
-
95 dB
92 dB |
| Input Sensitivity/Impedance |
Line Level: 200 mV/100K ohms |
| Contour (LF / HF) |
±6 dB at 50 Hz / 15 KHz |
| Preamp Output Level/Impedance |
1.0 V / 1K ohm |
| Decodable Digital Input Signal |
Dolby Digital, Dolby Digital EX, DTS, DTS ES, DTS96/24, LPCM(up to 192K), HDCD, MP3, MPEG Multichannel |
| Video |
|
| Frequency Response |
3 Hz - 10 MHz, ± 3 dB (Composite, S-Video)
3 Hz - 100 MHz, ± 3 dB (Component Video) |
| Signal to Noise Ratio |
45 dB |
| Input Impedance |
75 ohms |
| Output Impedance |
75 ohms |
| Output Level |
1.0 Volt |
| FM Tuner |
|
| Usable Sensitivity |
14.2 dBf |
| Signal to Noise Ratio (at 65 dBf) |
70 dBf |
| Harmonic Distortion (at 65 dBf) |
0.03% |
| Stereo Separation (1 kHz) |
45 dB |
| Output level |
1 V |
| Antenna Input |
75 ohms unbalanced |
| AM Tuner |
|
| Sensitivity |
500 uV/m |
| Signal to Noise Ratio |
40 dB |
| Output level |
500 mV |
| Antenna Input |
Loop Antenna |
| General |
|
| Power Consumption: |
990 watts, Idling power 130 watts, Standby 19 watts |
Power Requirements
(AC) |
115 volts, 60 Hz (USA version)
230 volts, 50 Hz (CE version) |
Dimensions
(W x H x D) |
433 x 189 x 400 mm
17¹⁄? x 7¹⁄? x 15³⁄?” |
| Weight (net) |
54 lbs. |
Front Panel Height
(for rack mount) |
176 mm |
