Crestron iLux CLS-C6

Category: 5.0 Lighting Control Systems
Item number: CLS-C6W
Price: Call for price

The iLux CLS-C6 is a complete, integrated lighting system designed for wall mount installation in boardrooms, auditoriums, home theaters, or anywhere versatile and cost-effective control of lighting and shades is required. Crestron’s reputation for innovation and reliability, combined with high-quality integrated dimming, native shade control, configurable rocker buttons, extensive integration ability and many other advanced features make iLux the ideal choice for all types of room lighting and shade control applications.

SPECIFICATIONS

Load Ratings
Per Channel: 800 Watts/VA (6.6 Amps @ 120 Volts AC)
Module Total: 1920 Watts/VA (16 Amps @ 120 Volts AC)
Load Types: Incandescent, Magnetic Low-voltage, Neon/Cold Cathode, Dimmable 2-Wire
Fluorescent, & Non-Dim Lighting (also: Electronic Low-voltage, 3-wire and 4-wire
Fluorescent, & 277V via Expansion Modules; sold separately)

Power Requirements
20 Amps @ 120 Volts AC, 60Hz, single phase

Connections
LOCAL DEVICES: (1) 4-pin 5mm detachable terminal block
Cresnet Master port for local devices including:

C2N-DB and CNX-B Series keypads, 16 maximum

C2N-SSC-2, C2N-SDC, and C2N-SDC-DC shade controllers; 16 maximum

External Crestron motion detectors, 2 maximum

Additional CLS-C6 units, 8 maximum
Additional power supply required beyond 4 devices; C2N-SDC-DC always requires an additional power supply

CONTROL SYSTEM: (1) 4-pin 5mm detachable terminal block Cresnet Slave port for connection to a 2-Series control system
HOT: (1) Captive screw terminal, line input from 15A or 20A feed
LOAD1 – LOAD6: (6) Captive screw terminals, dimmer channel outputs 1 – 6
NEUTRAL: (1) Captive screw terminal
GROUND: (1) Captive screw terminal
PC (front): (1) 3.5mm TRS mini-phone jack, RS-232 Programming port

Controls
Buttons 1 – 6: (6) 3-position rocker pushbuttons; configurable to recall (or toggle recall/off) individual scenes, control shades, or for master lighting or shade control; “scene mastering” option enables manual dimming utilizing rocker button action; also used to adjust lighting levels when in “Lighting” mode and shade positions when in “Shades” mode; additional functionality configurable via software
Up/Down Button: (1) 3-position rocker pushbutton; configurable for master lighting or shade control, or as a “shift” for Buttons 1-6; additional functionality configurable via software
ON: (1) pushbutton, recalls “On” scene
OFF: (1) pushbutton, turns all lights off
LIGHTS, SHADES: (2) Pushbuttons, select “Lights” or “Shades” modes
SAVE, CANCEL, ^, v: (4) Pushbuttons, navigate and execute setup functions
Reset: Recessed miniature pushbutton for hardware reset
Dimming Ramp Rate: 5 seconds (default), software adjustable 1 to 10 seconds
Scene Fade Time: 2 seconds (default), software adjustable 0 seconds to 99 minutes

LED Indicators
Scenes: (6-white) Correspond with each “Scene” Button
High/Low: (2-white) Indicate “Shift” status
ON: (1-white) Indicates “On” Scene is selected
LIGHTS, SHADES: (2-green) Indicates “Lights” or “Shades” mode is active
SAVE, CANCEL: (2-green) Correspond with “Save” and “Cancel” Buttons
MIN, SEC: (2-green) Indicates display of “Minutes” or “Seconds”
1 – 6: (6-green) 7-Segment bargraphs, indicate lighting levels and shade positions
Numeric Display: (2-green) 8-Segment digits, indicates modes and setup values

IR Receiver
Reception Frequency: 36 kHz
Requires Crestron IR remote, sold separately

Motion Detector (CLS-C6M Only)
Type: Infrared
Range: 20 to 30 feet at 4 foot elevation

Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)

Enclosure
Mounts in a 4-gang electrical box, 3-1/2" deep minimum

Dimensions
Height: 4.48 in (11.38 cm)
Width: 8.89 in (22.58 cm)
Depth: 2.50 in (6.35 cm) for CLS-C6, 2.59 in (6.58 cm) for CLS-C6M

Weight
1.43 lbs (0.65 kg)

Switch to print view

« Back to category