Crestron Compact Control System with Ethernet

Category: 3.1 Electronics
Item number: MP2E
Price: Call for price

MP2E Integrated AV Control System with Ethernet The MP2E combines an Ethernet control system and audio/video switcher in a single box to provide a cost-effective total room control solution. Easily configured with Crestron SystemBuilder™ software, the MP2E is all that is needed to select and control all of the rooms AV and environmental resources including VCRs, DVD/CD players, projectors, screens, lighting and more. With a unique combination of high-performance features and performance at an affordable price, the MP2E is the ideal AV control solution for college campuses, corporate meeting and training centers, and other multi-room facilities.

Key Features

2-Series engine | Dual-bus architecture

Integrated AV Switcher/Processor

Cresnet port - master/slave selectable

10/100 Ethernet | SSL encryption

e-Control 2 enabled | SNMP support

2 Com ports (RS-232/422/485)

4 IR/serial ports

4 Versiport I/O ports

4 Low-voltage relay ports

IR wireless compatible using CNXRMIRD

External power supply included

Single-space EIA rack-mountable

Processor
CPU - 32-bit Freescale ColdFire® Microprocessor
Processing Speed - 257 MIPS (Dhrystone 2.1 benchmark)

Memory
SDRAM - 32 MB
NVRAM - 256 KB
Flash - 4 MB

Operating System
Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+®

Ethernet
10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications

Video
Features - 4x2 composite matrix switcher or 2x1 Y/C (S-Video) switcher
Bandwidth - 100MHz minimum
Crosstalk - 60dB

Audio
Features - 7x1 Stereo Audio Switcher and Digital Parametric and/or Graphic Equalizer
Master Volume -80dB to +20dB, 0.1dB steps (balanced I/O)
Input Compensation - ±10dB per input channel
Bass/Treble Gain Range - ±15dB, 0.5dB steps
Equalization Modes :

5-band graphic plus 1-band parametric;

speech-optimized 5-band graphic plus 1-band parametric;

3-band graphic plus 3-band parametric;

6-band parametric

PEQ Filter Gain - ±12dB, 0.1 dB steps from DMT; +24/-36dB, 0.1 dB steps from SIMPL
PEQ Filter Bandwidth - .02 to 2.0 octaves (1.0 to 3.0 for shelving)
PEQ Filter Center Frequency - 25Hz to 19.9kHz from DMT; 5Hz to 24KHz from SIMPL
PEQ Filter Types - low pass, high pass, EQ filter (peaking/notching), bass shelf, and treble shelf
GEQ Filter Gain - +5/-10dB, 0.1dB steps from DMT; ±10dB, 0.1dB steps from SIMPL
Frequency Response - +0/-0.5 dB 20Hz to 20kHz
THD + Noise - <0.005% at 1kHz, 20Hz–20kHz A-weighted, max I/O
S/N Ratio - >97 dB, 20Hz to 20 kHz A-weighted
Channel Separation - >100dB at 1kHz, 90dB 20 Hz to 20kHz
Crosstalk - > -90dB 20Hz to 20kHz
Common Mode Rejection - >85dB 20Hz to 20kHz

Connectors
COM A – B - (2) DB9 male, bidirectional RS-232/422/485 ports; Up to 115.2k baud; Hardware and software handshaking support; All ports support C2N-NPA8 Network Poll Accelerator
INFRARED-SERIAL OUTPUT A – D - (4) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; Individual signal generator per port, allowing simultaneous firing of all ports
I/O Versiports 1 – 4 - (1) 5-pin 3.5mm detachable terminal block comprising (4) digital input/output or analog input ports (referenced to GND); Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC; Digital Output: 250mA sync from maximum 24 Volts DC, catch diodes for use with “real world” loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms; Programmable 5 Volts, 2k ohms pull-up resistor per pin
RELAY OUTPUT 1 - 4 - (1) 8-pin 3.5mm detachable terminal block comprising (4) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts
IR IN - (1) 3-pin 3.5mm detachable terminal block; For connection of the CNXRMIRD IR Receiver (sold separately); Allows IR wireless control from third-party universal remotes loaded with RC-5 IR commands
VIDEO IN 1 – 4 - (4) BNC female comprising (4) composite or (2) S-Video inputs; Input Impedance: 75 ohms; Discrete video sensing on each input
VIDEO OUT 1 - 2 - (2) BNC female comprising (2) composite or (1) S-Video outputs; Output Impedance: 75 ohm
AUDIO IN 1 – 2 - (2) 5-pin 3.5mm detachable terminal blocks comprising (2) balanced/unbalanced stereo line-level inputs; Input Impedance: 15k ohms balanced, 10k ohms unbalanced; Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced
AUDIO IN 3 - 7 - (5) 3-pin 3.5mm detachable terminal blocks comprising (5) unbalanced stereo line-level inputs; Input Impedance: 10k ohms; Maximum Input Level: 2 Vrms
AUDIO OUT L/R - (1) 5-pin 3.5mm detachable terminal block; Balanced/unbalanced stereo line-level output; Output Impedance: 200 ohms balanced, 100 ohms unbalanced; Maximum Output Level: 3.6 Vrms balanced, 1.8 Vrms unbalanced
LAN - (1) 8-wire RJ45 with 2 LED indicators; 10/100BaseT Ethernet port; Green LED indicates link status; Yellow LED indicates Ethernet activity
COMPUTER - (1) DB9 female, RS-232 computer console port
NET - (1) 4-pin 3.5mm detachable terminal block; Cresnet port, Master/Slave selectable; Expandable via C2N-NPA8 Network Poll Accelerator
24VDC - (1) 2mm barrel DC power jack, 24 Volt DC power input (PW-2410RU power supply included) Passes through to NET port to power Cresnet devices
Ground - (1) 6-32 screw, chassis ground lug

Reset Buttons
HW-R - Hardware reset (reboots the control system)
SW-R - Software reset (restarts the SIMPL program)

LED Indicators
PWR - (1 green) Indicates DC power supplied to unit
NET - (1 yellow) Indicates Cresnet bus activity
ERR - (1 red) Indicates a hardware or software error condition
LNK - (1 red) Indicates a valid connection on LAN port
ACT - (1 red) Indicates activity on LAN port

Power Requirements
18 Watts (0.75 Amp) @ 24 Volts DC (PW-2410RU power supply included)
Available Cresnet Power- 7 Watts using PW-2410RU (included), or 30 Watts using PW-2420RU (sold separately)
Cresnet Power Usage - 18 Watts (0.75 Amp @ 24 Volts DC) with no power supply connected to the 24VDC connector

Environmental
Temperature - 41° to 113°F (5° to 45°C)
Humidity - 10% to 90% RH (non-condensing)

Enclosure
Black metal, 1U 19” rack-mountable (rack ears included)

Dimensions
Height – 1.70 in (4.32 cm)
Width - 19.00 in (48.26 cm) with ears; 17.03 in (43.24 cm) without ears Depth - 8.50 in (21.59 cm)

Weight
3.54 lbs (1.59 kg)

Switch to print view

« Back to category