Rotel RX 1052 AM/FM 4 Zone Stereo Receiver w/100W ch
- Category: 1.1 Electronics & DVD Players
- Item number: RX-1052
- Price: Call for price
The RX-1052 conclusively proves that “stereo” is very much a part of today’s world where both music and movies provide enriching entertainment for the entire family. The RX-1052 doesn’t limit itself to one room either. In fact, the RX-1052’s unique combination of capabilities means you can enjoy your music and video sources in many different areas of your home: the den, beside the pool, in the kitchen, or simply relaxing in the living room.
Where Performance Counts
Consider the RX-1052’s basic capabilities for starters. Here, Balanced Design results in superior performance indeed. We rate power output very conservatively at 100 watts RMS per channel. But there are important differences between this rating and ones you may see from other manufacturers. That’s because the RX-1052 features a rock-solid power supply built around an oversized custom-manufactured toroidal transformer coupled to high quality storage capacitors. Eight discrete, high current output transistors insure uncompromising reproduction of the most difficult sources, even when the RX-1052 is used with inefficient speakers in large rooms. Connecting those speakers is easy thanks to high quality, four-way binding posts. And switching between speaker pairs is even easier thanks to remote selection. For the vinyl aficionado – or just folks who continue to enjoy a substantial record collection – the RX-1052 features a high quality phono preamplifier optimized for moving magnet cartridges.
Your New Stereo Centerpiece – With Video!
For those who don’t desire the multiple speaker boxes required for surround sound, the RX-1052 is the perfect complement to a new flat-panel TV and video sources like a DVD player or satellite box. Four composite video inputs, a monitor output, and video switching makes integrating your existing audio gear with the newest video components surprisingly easy.
Beyond A Single Room
The RX-1052 can be the multi-room/multi-source heart of a “whole house” audio/video system! When used with six channels of external amplification – either three stereo amps or an all-in-one six channel model like Rotel’s RMB-1066 – the RX-1052 lets you direct up to eight audio or A/V sources to as many as four different locales. You maintain fully independent source selection, power on/off, and volume adjustment for each zone! And if you want to “get down and party,” the RX-1052’s “Party Mode” lets you do just that by piping the same source throughout your home. The RX-1052 includes four independent composite video outputs, too, so you can watch what you want where you want to watch it. Independent IR (infrared) links give you source control from any room while four separate 12 volt “trigger” circuits energize just those system components you need for maximum enjoyment – and maximum energy conservation.
S P E C I F I C A T I O N S
Model RX-1052
A U D I O
100 watts/channel (20–20k Hz, <0.05% THD, 8 ohms)
Frequency Response (front) Line Level: 10 Hz - 70 kHz, ±3 dB
Phono: 20 Hz - 20 kHz, ±1 dB THD (front, 1kHz) 0.05%
IM Distortion (60 Hz:7 kHz)<0.05%
S/N Ratio IHF A (stereo) Line Level: 92 dB
Phono: 74 dB
Input Overload Line Inputs: 5 V
Phono Inputs: >120 mV
Input Impedance 47kOhms
Frequency Response 3Hz - 10MHz (+/-3)
S/N Ratio 45 dB
Input Sensitivity / Impedance Line Level: 160 mV/47 kohms
Phono: 2.5 mV/47 kohms
Tone Controls (Bass/Treble) ±8 dB at 100 Hz/10 kHz
Output voltage (75 ohms) 1V
V I D E O
Frequency Response 3 Hz-10 MHz, ± 3 dB
Signal to Noise Ratio 45 dB
Input Impedance 75 ohms
Output Impedance 75 ohms
Output Level 1 volt
> FM T U N E R
Usable Sensitivity 14.2 dBf
50dB Quieting Sensitivity 20.2 dBf (mono) / 45.3 dBf (stereo)
Signal to Noise Ratio (at 65 dBf) 70 dBf (mono) / 65 dBf (stereo)
Harmonic Distortion (at 65 dBf) 0.3% (mono) / 0.5% (stereo)
FM Harmonic Distortion (65dBF/1kHz) 0.3% (mono) 0.5% (stereo)
Frequency Response 30 Hz-14 kHz, ±1.5 dB
Capture Ratio 2.0 dB
Alternate Channel Selectivity 47 dB (±400 kHz)
Spurious Response Ratio 80 dB
Image Response Ratio 65 dB
IF Response Ratio 80 dB
AM Suppression Ratio 52 dB
Stereo Separation (100Hz/1 kHz/10 kHz): 40 dB/45 dB/35 dB
Output level 1.0 V
Antenna Input 75 ohms unbalanced
AM T U N E R
Sensitivity 500 µV/m
Selectivity 25 dB
Image Response Ratio 35 dB
Signal to Noise Ratio 40 dB
Output level 250 mV
Antenna Input Loop Antenna
G E N E R A L
Power Consumption: 300 Watts
Dimensions (W x H x D): 432 x 121 x 359mm 17" x 4 3/4" x 14 1/8"
Weight (net): 10.8 kg, 30.4 lb
Model RX-1052
A U D I O
100 watts/channel
(20–20k Hz, <0.05% THD, 8 ohms)
Frequency Response (front) Line Level: 10 Hz - 70 kHz, ±3 dB
Phono: 20 Hz - 20 kHz, ±1 dB
THD (front, 1kHz) 0.05%
IM Distortion (60 Hz:7 kHz)<0.05%
S/N Ratio IHF A (stereo) Line Level: 92 dB
Phono: 74 dB
Input Overload Line Inputs: 5 V
Phono Inputs: >120 mV
Input Impedance 47kOhms
Frequency Response 3Hz - 10MHz (+/-3)
S/N Ratio 45 dB
Input Sensitivity / Impedance Line Level: 160 mV/47 kohms
Phono: 2.5 mV/47 kohms
Tone Controls (Bass/Treble) ±8 dB at 100 Hz/10 kHz
Output voltage (75 ohms) 1V
V I D E O Frequency Response 3 Hz-10 MHz, ± 3 dB
Signal to Noise Ratio 45 dB
Input Impedance 75 ohms
Output Impedance 75 ohms
Output Level 1 volt
FM T U N E R
Usable Sensitivity 14.2 dBf
50dB Quieting Sensitivity 20.2 dBf (mono) / 45.3 dBf (stereo)
Signal to Noise Ratio (at 65 dBf) 70 dBf (mono) / 65 dBf (stereo)
Harmonic Distortion (at 65 dBf) 0.3% (mono) / 0.5% (stereo)
FM Harmonic Distortion (65dBF/1kHz) 0.3% (mono) 0.5% (stereo)
Frequency Response 30 Hz-14 kHz, ±1.5 dB
Capture Ratio 2.0 dB
Alternate Channel Selectivity 47 dB (±400 kHz)
Spurious Response Ratio 80 dB
Image Response Ratio 65 dB
IF Response Ratio 80 dB
AM Suppression Ratio 52 dB
Stereo Separation (100Hz/1 kHz/10 kHz): 40 dB/45 dB/35 dB
Output level 1.0 V
Antenna Input 75 ohms unbalanced
AM T U N E R
Sensitivity 500 µV/m
Selectivity 25 dB
Image Response Ratio 35 dB
Signal to Noise Ratio 40 dB
Output level 250 mV
Antenna Input Loop Antenna
G E N E R A L
Power Consumption: 300 Watts
Dimensions (W x H x D): 432 x 121 x 359mm 17" x 4 3/4" x 14 1/8"
Weight (net): 10.8 kg, 30.4 lb
Where Performance Counts
Consider the RX-1052’s basic capabilities for starters. Here, Balanced Design results in superior performance indeed. We rate power output very conservatively at 100 watts RMS per channel. But there are important differences between this rating and ones you may see from other manufacturers. That’s because the RX-1052 features a rock-solid power supply built around an oversized custom-manufactured toroidal transformer coupled to high quality storage capacitors. Eight discrete, high current output transistors insure uncompromising reproduction of the most difficult sources, even when the RX-1052 is used with inefficient speakers in large rooms. Connecting those speakers is easy thanks to high quality, four-way binding posts. And switching between speaker pairs is even easier thanks to remote selection. For the vinyl aficionado – or just folks who continue to enjoy a substantial record collection – the RX-1052 features a high quality phono preamplifier optimized for moving magnet cartridges.
Your New Stereo Centerpiece – With Video!
For those who don’t desire the multiple speaker boxes required for surround sound, the RX-1052 is the perfect complement to a new flat-panel TV and video sources like a DVD player or satellite box. Four composite video inputs, a monitor output, and video switching makes integrating your existing audio gear with the newest video components surprisingly easy.
Beyond A Single Room
The RX-1052 can be the multi-room/multi-source heart of a “whole house” audio/video system! When used with six channels of external amplification – either three stereo amps or an all-in-one six channel model like Rotel’s RMB-1066 – the RX-1052 lets you direct up to eight audio or A/V sources to as many as four different locales. You maintain fully independent source selection, power on/off, and volume adjustment for each zone! And if you want to “get down and party,” the RX-1052’s “Party Mode” lets you do just that by piping the same source throughout your home. The RX-1052 includes four independent composite video outputs, too, so you can watch what you want where you want to watch it. Independent IR (infrared) links give you source control from any room while four separate 12 volt “trigger” circuits energize just those system components you need for maximum enjoyment – and maximum energy conservation.
S P E C I F I C A T I O N S
Model RX-1052
A U D I O
100 watts/channel (20–20k Hz, <0.05% THD, 8 ohms)
Frequency Response (front) Line Level: 10 Hz - 70 kHz, ±3 dB
Phono: 20 Hz - 20 kHz, ±1 dB THD (front, 1kHz) 0.05%
IM Distortion (60 Hz:7 kHz)<0.05%
S/N Ratio IHF A (stereo) Line Level: 92 dB
Phono: 74 dB
Input Overload Line Inputs: 5 V
Phono Inputs: >120 mV
Input Impedance 47kOhms
Frequency Response 3Hz - 10MHz (+/-3)
S/N Ratio 45 dB
Input Sensitivity / Impedance Line Level: 160 mV/47 kohms
Phono: 2.5 mV/47 kohms
Tone Controls (Bass/Treble) ±8 dB at 100 Hz/10 kHz
Output voltage (75 ohms) 1V
V I D E O
Frequency Response 3 Hz-10 MHz, ± 3 dB
Signal to Noise Ratio 45 dB
Input Impedance 75 ohms
Output Impedance 75 ohms
Output Level 1 volt
> FM T U N E R
Usable Sensitivity 14.2 dBf
50dB Quieting Sensitivity 20.2 dBf (mono) / 45.3 dBf (stereo)
Signal to Noise Ratio (at 65 dBf) 70 dBf (mono) / 65 dBf (stereo)
Harmonic Distortion (at 65 dBf) 0.3% (mono) / 0.5% (stereo)
FM Harmonic Distortion (65dBF/1kHz) 0.3% (mono) 0.5% (stereo)
Frequency Response 30 Hz-14 kHz, ±1.5 dB
Capture Ratio 2.0 dB
Alternate Channel Selectivity 47 dB (±400 kHz)
Spurious Response Ratio 80 dB
Image Response Ratio 65 dB
IF Response Ratio 80 dB
AM Suppression Ratio 52 dB
Stereo Separation (100Hz/1 kHz/10 kHz): 40 dB/45 dB/35 dB
Output level 1.0 V
Antenna Input 75 ohms unbalanced
AM T U N E R
Sensitivity 500 µV/m
Selectivity 25 dB
Image Response Ratio 35 dB
Signal to Noise Ratio 40 dB
Output level 250 mV
Antenna Input Loop Antenna
G E N E R A L
Power Consumption: 300 Watts
Dimensions (W x H x D): 432 x 121 x 359mm 17" x 4 3/4" x 14 1/8"
Weight (net): 10.8 kg, 30.4 lb
Model RX-1052
A U D I O
100 watts/channel
(20–20k Hz, <0.05% THD, 8 ohms)
Frequency Response (front) Line Level: 10 Hz - 70 kHz, ±3 dB
Phono: 20 Hz - 20 kHz, ±1 dB
THD (front, 1kHz) 0.05%
IM Distortion (60 Hz:7 kHz)<0.05%
S/N Ratio IHF A (stereo) Line Level: 92 dB
Phono: 74 dB
Input Overload Line Inputs: 5 V
Phono Inputs: >120 mV
Input Impedance 47kOhms
Frequency Response 3Hz - 10MHz (+/-3)
S/N Ratio 45 dB
Input Sensitivity / Impedance Line Level: 160 mV/47 kohms
Phono: 2.5 mV/47 kohms
Tone Controls (Bass/Treble) ±8 dB at 100 Hz/10 kHz
Output voltage (75 ohms) 1V
V I D E O Frequency Response 3 Hz-10 MHz, ± 3 dB
Signal to Noise Ratio 45 dB
Input Impedance 75 ohms
Output Impedance 75 ohms
Output Level 1 volt
FM T U N E R
Usable Sensitivity 14.2 dBf
50dB Quieting Sensitivity 20.2 dBf (mono) / 45.3 dBf (stereo)
Signal to Noise Ratio (at 65 dBf) 70 dBf (mono) / 65 dBf (stereo)
Harmonic Distortion (at 65 dBf) 0.3% (mono) / 0.5% (stereo)
FM Harmonic Distortion (65dBF/1kHz) 0.3% (mono) 0.5% (stereo)
Frequency Response 30 Hz-14 kHz, ±1.5 dB
Capture Ratio 2.0 dB
Alternate Channel Selectivity 47 dB (±400 kHz)
Spurious Response Ratio 80 dB
Image Response Ratio 65 dB
IF Response Ratio 80 dB
AM Suppression Ratio 52 dB
Stereo Separation (100Hz/1 kHz/10 kHz): 40 dB/45 dB/35 dB
Output level 1.0 V
Antenna Input 75 ohms unbalanced
AM T U N E R
Sensitivity 500 µV/m
Selectivity 25 dB
Image Response Ratio 35 dB
Signal to Noise Ratio 40 dB
Output level 250 mV
Antenna Input Loop Antenna
G E N E R A L
Power Consumption: 300 Watts
Dimensions (W x H x D): 432 x 121 x 359mm 17" x 4 3/4" x 14 1/8"
Weight (net): 10.8 kg, 30.4 lb